• Dualflame MC
    The HORN DUALFLAME MC gas burner is installed as an underport-burner in cross fired or end fired regenerative furnaces. Its design enables the furnace operator to adjust the flame formation smoothly within a wide range – from short and sharp to long and soft – by using two separate gas nozzles in one burner. The gas quantity flow in each nozzle can be controlled manua...
  • Cold Air Casing Burner CCB
    The HORN industrial burner type CCB is a specially designed burner with a heat resistant steel casing for hot air up to 450 °C. The entire combustion air is force-supplied to the burner by air fans. The industrial burner can be operated with all types of gas (natural gas, LPG air mixture, and biogas) and all types of oil (heavy fuel oil, light fuel oil). The casing will therefore only be eq...
  • Dualflame AC
    The HORN DUALFLAME AC gas burner is installed as an underport-burner in cross fired or end fired regenerative furnaces. Its design enables the furnace operator to adjust the flame formation smoothly within a wide range – from short and sharp to long and soft – by using two separate gas nozzles in one burner. The gas quantity flow in each nozzle can be control...
  • Oil Burner MOB
    The HORN MOB burner for oil is installed as underport burner in cross fired or end fired regenerative furnaces. The burner is able to operate with different type and quality of oil available in different areas of the world. Its design is characterized by two burner nozzles, one for oil and one for compressed air. It enables the furnace operator to adjust the flame formation in two ways: the dim...
  • Hot Air Casing Burner HCB
    The HORN industrial burner type HCB, is a burner with an air casing and a central located burner lance for usage at recuperative fired furnaces. The burner lance can be the gas burner Dualflame or oil burner MOB. The casing contains a high temperature-resistant inner lining and is made of special shape to distribute the combustion air homogenous around the burner lance. Hereby the burner is dam...
  • Gas-Air-Mixture burner
    The Gas / Air Mixture burner is typically used together with the gas station “CORA” to heat the glass distribution channel and forehearths. The Gas / Air Mixture burners are installed along the length of the distributor and forehearth side wall with a distance of 114 mm between burners. The burners are made of steel with either a steel nozzle or ceramic nozzle at the front. The ...
  • Cold top batch charger HVFE
    The cold top batch charger is used for electrically heated furnaces and consists mainly of a base frame, feeding hopper and vibratory chute. The base frame can be moved in both the x-axis and y-axis by means of two carriages. In this way, the batch charger can apply directly into the glass bath, batch layers which are lying parallel to each other on the y-axis. Therefore 7 initiators on the...
  • Vibratory charger HVR for open doghouse
    The HORN vibratory batch charger HVR is a solid and long reliable charger for cold batch into side or end fired furnaces. The charger can be used therefore at regenerative, recuperative or oxy-fuel furnaces with lateral or frontal, open doghouse. The principle of operation is to feed the batch via a vibratory chute into the doghouse and push it via a water cooled paddle onto the glass surfa...
  • Vibratory charger HVR 700F-2P for closed doghouse
    The HORN vibratory batch charger HVR 700F-2P is a solid and long reliable charger for preheated and non-preheated batch into side or end fired furnaces. The charger can be used therefore at regenerative, recuperative or oxy-fuel furnaces with lateral or frontal, open doghouse. The principle of operation is to feed the batch via a lengthwise separated vibratory chute into the doghouse and pu...
  • Piston Batch Charger for closed doghouse
    The batch charger consists of a fixed-mounted base and a movable upper structure with a feed hopper. If the hopper is filled by means vibrating chute an electrical level sensor in the hopper is used. A hydraulically actuated piston presses the batch with shards through the water-cooled insert attachments into the furnace. The control of the piston is done by the glass level control and can ...
  • Screw charger for closed doghouse
    The HORN screw charger mainly consists of the main frame, a feeding hopper and the water cooled screw with housing. If the raw materials are filled directly from the furnace day hopper in the charger, the feeding hopper may serve as a transition piece between the day hopper and the charging screw. The mixture from the day hopper can also be transported via a chute to the feeding hopper. To cont...
back   top
霍恩玻璃技术(北京)有限公司 – 版权所有