• Dualflame MC
    The HORN DUALFLAME MC gas burner is installed as an underport-burner in cross fired or end fired regenerative furnaces. Its design enables the furnace operator to adjust the flame formation smoothly within a wide range – from short and sharp to long and soft – by using two separate gas nozzles in one burner. The gas quantity flow in each nozzle can be controlled manua...
  • Cold Air Casing Burner CCB
    The HORN industrial burner type CCB is a specially designed burner with a heat resistant steel casing for hot air up to 450 °C. The entire combustion air is force-supplied to the burner by air fans. The industrial burner can be operated with all types of gas (natural gas, LPG air mixture, and biogas) and all types of oil (heavy fuel oil, light fuel oil). The casing will therefore only be eq...
  • Oil Burner MOB
    The HORN MOB burner for oil is installed as underport burner in cross fired or end fired regenerative furnaces. The burner is able to operate with different type and quality of oil available in different areas of the world. Its design is characterized by two burner nozzles, one for oil and one for compressed air. It enables the furnace operator to adjust the flame formation in two ways: the dim...
  • Gas-Air-Mixture burner
    The Gas / Air Mixture burner is typically used together with the gas station “CORA” to heat the glass distribution channel and forehearths. The Gas / Air Mixture burners are installed along the length of the distributor and forehearth side wall with a distance of 114 mm between burners. The burners are made of steel with either a steel nozzle or ceramic nozzle at the front. The ...
back   top
霍恩玻璃技术(北京)有限公司 – 版权所有