• Distributor Channel GCS100
    This HORN distributor channel design is an up to date modern construction employing all today’s techniques, like high quality refractory material, direct and indirect air cooling systems as well as radiation cooling equipment, to achieve optimum thermal homogeneity combined with minimum energy requirement. The superstructure modules of the Distributor are designed to obta...
  • Forehearths GCS200
    The HORN® Forehearth GCS 200 system works with Centreline Radiation Cooling and represents a today’s most advanced technology in the areas of forehearth design for low and medium capacity and accurate temperature adjustment. The refractory structure design is up to date modern construction employing all today’s techniques to achieve optimum thermal homogeneity combined ...
  • Forehearths GCS300
    The HORN® Forehearth GCS 300 system works with Centreline Air Cooling and represents a today’s  most advanced technology in the areas of forehearth design for high pull forehearth and highest temperature homogeneity requirements. The refractory structure design is up to date modern construction employing all today’s techniques to achieve optimum thermal homogeneity...
  • Dualflame MC
    The HORN DUALFLAME MC gas burner is installed as an underport-burner in cross fired or end fired regenerative furnaces. Its design enables the furnace operator to adjust the flame formation smoothly within a wide range – from short and sharp to long and soft – by using two separate gas nozzles in one burner. The gas quantity flow in each nozzle can be controlled manua...
  • Cold Air Casing Burner CCB
    The HORN industrial burner type CCB is a specially designed burner with a heat resistant steel casing for hot air up to 450 °C. The entire combustion air is force-supplied to the burner by air fans. The industrial burner can be operated with all types of gas (natural gas, LPG air mixture, and biogas) and all types of oil (heavy fuel oil, light fuel oil). The casing will therefore only be eq...
  • Dualflame AC
    The HORN DUALFLAME AC gas burner is installed as an underport-burner in cross fired or end fired regenerative furnaces. Its design enables the furnace operator to adjust the flame formation smoothly within a wide range – from short and sharp to long and soft – by using two separate gas nozzles in one burner. The gas quantity flow in each nozzle can be control...
  • Oil Burner MOB
    The HORN MOB burner for oil is installed as underport burner in cross fired or end fired regenerative furnaces. The burner is able to operate with different type and quality of oil available in different areas of the world. Its design is characterized by two burner nozzles, one for oil and one for compressed air. It enables the furnace operator to adjust the flame formation in two ways: the dim...
  • Hot Air Casing Burner HCB
    The HORN industrial burner type HCB, is a burner with an air casing and a central located burner lance for usage at recuperative fired furnaces. The burner lance can be the gas burner Dualflame or oil burner MOB. The casing contains a high temperature-resistant inner lining and is made of special shape to distribute the combustion air homogenous around the burner lance. Hereby the burner is dam...
  • Gas-Air-Mixture burner
    The Gas / Air Mixture burner is typically used together with the gas station “CORA” to heat the glass distribution channel and forehearths. The Gas / Air Mixture burners are installed along the length of the distributor and forehearth side wall with a distance of 114 mm between burners. The burners are made of steel with either a steel nozzle or ceramic nozzle at the front. The ...
  • Measurement and control equipment
    HORN provides complete measurement and control equipment for the melting tank, distributor and forehearths. The complete equipment is designed on most modern computer stations with E-plan software. This program assists the engineers at the design and dimensioning of the control equipment. On basis of the long experience of HORN only most reliable and durable equipment from special suppliers, e....
  • SCADA - Computer Supervisor system
    To get most advantage and efficiency of the PLC control system at a glass melting tank, HORN provides SCADA systems with application software (Win CC). The system is planned to serve one furnace including Distributor/Forehearths on the basis of a SOFTWARE CONTROL. The Software is installed and configured according to customer requirements. Means the coloured graphics showing layout of Melti...
  • Glass level control system
    A constant glass level in the melting end is a very important control component in the glass melting process. Glass level variations influence the steady operation of the furnace, and due to hydrostatic pressure, have a significant influence on the gob weight. The high measuring accuracy of OPTIBEAM amounting to ± 0,10 mm allows for the precise control of the glass level together wit...
back   top
霍恩玻璃技术(北京)有限公司 – 版权所有